Today the focus is going to be on heavy equipment safety. Dangers that come with heavy equipment operations are serious. You can prevent getting dust blown in your face by wearing goggles or a mask, but there are much more serious injuries that can result from operating this kind of equipment.

The first thing you want to do is to make sure no body is standing close to you when you’re operating the equipment. Make sure to let others know that they should never get close to you without letting you know first. Next, you’ll want to avoid wearing loose clothes. Make sure you wear clothes that fit snugly and tight. Include ear protection and slip resistant footwear, along with your goggles. If you don’t have short hair, make sure you tie your hair back.

Make sure you stop the engine and make use of a stick to remove debris when you are unclogging the discharge chute of your equipment. Don’t let any part of your body come into contact with any part of the equipment that gets very hot. Also, don’t leave the equipment running unattended.

Heavy Equipment Safety for electric snowblowers and gas snow blowers

Make sure that you understand that gas snow blowers and electric snow blowers are very dangerious machines to operate. Snow blowers are created to pick up snow and then throw it. The last thing you want is for it pick up glass bottles, stones or sticks and throwing them. When you’re operating the snow blower, stick to the pavement areas or well maintained surfaces that you are sure won’t hold any of these things.

Another part of heavy equipment safety is knowing the territory very well. Make sure that you know if there are any curbs and stumps. When you’re doing the snow blowing on an incline surface, make sure that you’re clearing up and down the incline, and not clearing across.

Heavy equipment safety is a very serious issue. Hopefully, these tips have helped you to understand more about heavy equipment safety and to stay sound and safe in the future!

In order to advance in any field, you have to gain two key things;

1. Experience
2. Training

Most employers prefer that you have both training and experience

If you don’t have a ton of experience, then certainly training is a big plus. The thing is, you don’t want to just go to any institution of higher learning to get your training. You could train on the job, by becoming an apprentice of some sort. This kind of training can be very beneficial, but your employer would have to invest quite a bit of time and money in you. Most employers don’t want to take that chance, because they may not have a guarantee that you’ll stay on board after you’ve trained.

You can also seek out a school and courses to get your training. In this regard, you’ll want to be sure that you’ve got a reputable school that is accredited and has a high success rate from it’s graduates. When you seek out a school for your training, you want to be sure that you can get personal attention and also hands on training. Hands on training involves you actually doing the work of a professional during and throughout your training courses. You want to go beyond mere text book knowledge and actually implement your skills in real time.

When you are able to implement your training in to real time, you are actually gaining the necessary experience and confidence to do the job. While many companies will want you to have some experience, the bottom line for them is whether or not you can do the job.

If you’ve had some solid training in your field, then you can demonstrate your ability and bypass the experience factor. You can let your prospective employers know that you do know how to do the job and that it would be in their best interest to hire someone like you.

Your Training With ATS is not going to be like others

We have a unique system of training our students. Not only do you get a solid foundation in the basic principles, but you also have actual professionals guide you and teach you hands on. You will understand not only the do’s and don’ts but you will also benefit from your instructor’s experience.

There are some things that cannot be learned from books and on your own. These things are learned with years of experience and you will gain them when you start your training with ATS.

You can get a free brochure and a DVD when you apply online. Just log on to our training website and find out more information. We can even help you with your financing to help you get started on your training classes right away. We even have a job placement program for those who graduate from our training classes. Just think about your possibilities when you develop your skills even further. Think about how much money you’re leaving behind on the table by not training with ATS.

Front loaders are special pieces of equipment that are impressive to look at. They tend to make a lot of other pieces of heavy equipment look like dwarf material. A lot of people are confused about what bulldozers and loaders do. Bulldozers and loaders are similar but they do two very different things. They are commonly mistaken for one another, though.

Bulldozers are not the same as loaders

Front loaders and bulldozers are available in many different sizes. The tractor part looks almost the same on both. You can find open cabin configurations on them and you can also find closed cabin configurations on each.

Sometimes bulldozer blades can be fitted with front loaders. This allows them to do a type of light dozing. This is not as good as the bulldozers, but it can be good enough when the requirements of the work project aren’t so heavy.

Front loaders with bulldozer blades can make distinguishing between loaders and bulldozers much more complicated and difficult. This is because the attachment is normally used for other things. The attachment that is used for loaders is usually a bucket. This lets you scoop and carry loads. To top off the confusion, bulldozers can also be fitted with buckets.

One way you can check the difference between loaders and bulldozers is if you look how far up they are from the ground. If you look at comparatively sized front loaders and bulldozers, the bulldozer will always sit a little closer to the ground. Loaders are higher up off the ground because of the big wheels that they have. Bulldozers don’t have this because they run on tracks. Because of the wheels, you can use loaders in almost any situation. Bulldozers can drive over very rought terrain.

Loaders can provide you with a very good career opportunity. The reason loaders are so special is the fact that they are versatile and widely used. Once you get certified in loaders, you can find work in mining, forestry, construction and agriculture. Loaders can provide just about anyone with a flexible career opportunity.

Enjoy great working conditions with loaders

Most loaders have air conditioning and a closed cabin, so you are away from the heat and cold. You can work comfortably, regardless of whether it is hot or cold outside. Loader drivers also have peace of mind because they have a job hat is low impact. If you want to find out more information on loaders and how to get your certification, contact ATS today.

There really isn’t much need to pull out graders these days if you’re working small or medium sized jobs. That doesn’t necessarily mean that graders are obsolete, though. Far from it, it means that graders are used for larger projects. The reason is that with the advances in technology, bulldozers are used to perform tasks and jobs that were impossible to perform previously. Laser guided graders and grading systems are available to more companies because of the affordable prices.

Bulldozers are able to perform some very amazing feats of grading in small work projects. This is probably why smaller companies are making use of them for their work jobs. It doesn’t matter if a bulldozer is laser guided or not, it is not going to replace the all purpose built grader. It can, however, allow spaces that were previously to tiny to be graded.

With tigh saces, you’re not always able to fit a grader into a property. You also won’t be able to give it the room it needs to maneuver. Graders are well situated for wide open areas, instead of the small spaces. That’s why graders are found in large construction projects, such as roadside work.

You usually won’t find graders leveling a suburban block, though. Graders are used for all kinds of big projects that require detail and precision. They are used for creating runways, roads and grading large foundations. They are also used a lot during the winter time, when they clear large masses of snow from the road. If you live in a location where there is a lot of snow, then you’ll see a lot of graders everywhere.

Graders aren’t for everyone

Graders are one of the more difficult pieces of heavy equipment that you can operate. Many people don’t start out driving graders. Instead, they work their way up. Driving grades is going to require a lot of control, because they are huge pieces of equipment. They are used for leveling airstrips and roads. It is easy to think that there isn’t much demand for graders, but the truth is that drivers of graders are always in demand. Contact us for more information on graders.

You may have asked yourself why you should get certification. One of the best reasons to get certified is because with certification, you have an official way to show off your training and your skills. It tells your prospective employers that you are serious about your career and that you have made the effort to get certification in your training. So how can you get certification?

First, you want to deal with the financing. Your certification has to be financed. Many people are able to finance themselves, however, if you’re not able to do so, then you can get financial aid. All you have to do is apply for financial aid with the loan institution. The process is simple and straightforward. You can also get a loan, and if you have good credit this should be easy as well. If you think you may need a co-signer, then by all means do so.

Next, you’ll get the training. Training takes a bit of time. You won’t be able to do it all in one day or in one week. If you’re training for your certification, you may not be able to work the same hours on your job. If you’re working full time and have a family, then you may need to consider how you are going to work your schedule so that you can still keep your life running smoothly during your certification. You’ll want to think things over and decide whether it is in your best interest to keep working full time, and to study full time. Perhaps you can study part time and work full time, or work part time and study full time. Weigh out the pros and cons of each decision and then compare them to each other. The last step is going to class on a regular basis. It’s not just paying for certification. You have to actually do your training. You won’t automatically pass just by paying for the certification, you’ve actually got to do something with it. In order to attain your certification, you will have to put in some major work, but the pay off at the end of your certification is huge. It means that you can get better paying jobs, better benefits, increase your income and experience more freedom. It means living a more comfortable life than you are living now, and that’s always good, right? If you have any more questions about certification and how to get started today, send us an email or call us today!

When choosing a good truck driving school you should look out for good reviews and testimonials. The first step is to check with your state department of motor vehicles organizatoin or your public safety department to find out what it will take to get your truck driving license or your commercial driving license in your area.

Next, you should look for a program that is certified. Not all schools will choose to have their courses and programs certified, so be aware of that. Make sure that your school will meet the minimum standards at least for certification, even if they aren’t certified.

Then, you’ll want to explore your truck diving course syllabus and see what kind of course material it will cover. Will it cover the basics of truck driving and teach you how to drive your truck? Have a chat with teachers, past students and administrators to get a good feel for how the school functions and the quality of courses it provides.

You’ll also want to find out if your state department of education will certify your school’s programs. Find out for sure at your local state department of education. Also, having a postgraduation job placement program is a bonus. It may not be necessary in the truck driving business, but it is a big bonus when you’re on the look out for a job after graduating. There are many opportunities that are available to you once you get your truck driving license. Make sure that you pass all the physical exams, keep a clean driving record and most of all, be dependable.

Being a dependable truck driver is one of the biggest assets you’ll have in your industry.

Also, be aware of license and diploma mills. These offer very short courses and don’t cover all of the basics. They only cover materials that are expected on a test or quiz. You may get your commercial license with them, but you won’t know how to operate a commercial truck. This may end being a big problem if you’re wanting to actually make money at it. You’re likely to lose out later when you compete for the best paying jobs in your industry with other qualified and experienced graduates from certified and quality schools.

Keep in mind, that when it comes to truck driving, it’s not how long you’re behind the wheel, but that you’re taught correctly while you’re behind the wheel. Price should be no criteria when it comes to your training. Lower priced schools thrive on word of mouth and recommendations.

You should look for schools that will offer you one on one training for truck driving. Some truck driving schools will place 5 to 8 students in a truck at one time. Most of the students that are able to get the better training, do so by getting private driving lessons with only one student per truck. If you are not getting this kind of instruction, you’re basically paying to watch other’s drive.

If you have any more questions about truck driving and how to get certified, contact ATS and we’ll get you started right away in a new career.

ATS has the broadest courses to boost you in your heavy equipment careers. Our programs are full time and comprehensive. They are also nationally recognized and accredited by the National Center For Construction Education and Research. Our mission is to create a safe and product work force of professionals. Our school delivers a variety of different courses and programs that are accredited by NCCER. We strive for two things, which are quality and consistency.

The National Center for Construction Education and Research was created to help decrease the workforce shortage that is so rampant in our industry. We are endeavoring to develop maintenance and pipeline courses. We are also supported by many hundreds of construction companies as well as trade associations.

The National Center for Construction Education and Research is a not for profit organization that was founded in 1995. It was founded by 11 of the world’s largest construction companies. This means that we are connected to a large force of construction companies and we can assist you in finding a job after you complete our schooling.

We have nationwide locations including, Wisconsin, Ohio, Colorado, California, Texas, Florida, South Carolina, Virginia, New Hampshire and soon Arizona. This meaks it easier for you to get the necessary skills you need to boost your career and your income potential.

Still not convinced? Check out this testimonial:

I am presently a finish dozer operator for MJ Ryan Construction Company in Burnsville, MN. My employment started one month after graduation and would have never been considered without the certification I received from ATS. The knowledge I received from thier down-to-earth instructors has proven to be invaluable. Attending ATS has been the single most important event of my life. I have already recouped the cost of the school, and it’s only been one year. I have already recommended this school to several people.

– Jim (Minnesota)

The kind of wages you can in heavy equipment careers vary. You can earn anywhere from $15 an hour and more, depending on what your skill level is and the location you are in. For entry level positions, you may start out with around $15 an hour. If you’re already experienced and have a broad level of skills and experience, you could be able to earn as much as $20 to $30 an hour.

Best of all, you don’t need a high school diploma or a GED to attend our schools to further your heavy equipment careers. We make it easy for just about anyone to advance their heavy equipment careers.

Make Six Figures A Year With Your Own Carpentry Business

Getting your carpentry certification is a great way to not only improve your skills but also a great way to boost your income. If you’re unskilled and working righ now, chances are that you’re working from place to place and not getting paid as much as you could if you were certified in carpentry. It’s a known fact that most companies will offer unskilled workers little compensation and little in the wa of job security.

By getting your carpentry certification, you gain more security!

When you get certified in carpentry, you increase your chances of job security. Adding this to the mix, makes things a little easier for you. You are also less likely to be let go at the end of a big and important construction project.

Carpentry certification differs in a lot from carpentry apprenticeship. When you do the apprenticeship, it will take 4 to 6 years to complete. By getting certified in carpentry, you can complete your training in a short period of time.

Fully-blown carpenters get paid more than apprentices. When you’re certified you can get more than an appentrice. You’ll also gain a solid and focused set of skills.

Your carpentry certification will give laser targeted skills. As an apprentice, you may end up being trained in a more broader specrum of skills. This can work for or against you, in the way that you end up learning things that you may not ever need or use in the future.

In summary, the benefits of getting carpentry certification are:

1. Increased income
2. Increased job security

Now, if you decide to get in business for yourself, you can definitely experience six figure a year income. Of course this includes having your own equipment, trucks, vans, and a hungry market, but many individuals just lke you are making 100,000 dollars a year or more in carpentry.

If you’re interested in getting certified in carpentry, go ahead and contact us today!

Training in heavy equipment, such as bulldozers and backhoes is much easier than you may have thought. You may have asked yourself the question what the age requirement is in order to attend your training schools. In order to train to operate backhoes and bulldozers with Associated Training Services, you have to be at least 18 years of age. The age limit is endless and as long as you are able to pass a DOT (Department of Transportation) physical, you’re able to attend our classes and learn. This means that even if you’re 80 years old and you’re able to pass the Department of Transportation physical, then you can attend our courses and classes and get the valuable training necessary to operate backhoes and bulldozers.

Why is the tuition for training to operate backhoes and bulldozers not listed on the site?

There are two different reasons:

1. The first reason is that the tuition is going to be different for each particular course and program
2. The second reasons is that the tuition for the program changes depending on the location. If you have any questions on the tuition for training in backhoes and bulldozers then call us at 800 383 7364.

How can you apply to start training in operating backhoes and bulldozes? the first step is to fill out our free application online. You can also call us and we can mail an application out to you that will include a free brochure as well. You’re never obligated to apply or sign up. You also don’t have to deal with pushy recruiters. It’s easy and it’s fast, so if you want to fill ouot an application you can.

Our schools are located all throughout the United States, and that includes New Hampshire, Ohio, Florida, Wisconsin, South Carolina, Virginia, Colorado, California and Texas.

Being able to operate heavy equipment, such as backhoes and bulldozers can be very lucrative. The wages vary depending on your location and the company you work with. The average is around $15 or more for entry level employment. We offer job placement services that help you find a job fast. Experienced operators can make as much as $30 an hour or more. The demand for people to operate backhoes and bulldozers is high and your opportunities are endless.

Don’t delay and contact us today to find out how you can enhance and build upon your existing skill base. Learning to operate backhoes and bulldozers is going to be the key element to being able to find work year round. You don’t even need a GED or a high school diploma in order to attend our heavy equipment and backhoes and bulldozer training programs.

Do you have all of your financial aid papers ready for your classes? Sometimes the process of getting financial aid can drag on, and that could mean missing classes and not getting started in time. Make sure that you have all of your paper work filled out and also have the correct school code on your paper work.

You can fill out your financial aid papers either online or have them sent to you through regular postal mail. Our certification programs are full time, so that means you will need to fill out the information on your financial aid papers stating that you are full time. When you attend our programs, you are involved with a nationally recognized program that is accredited by the National Center for Construction Education and Research or NCCER. Every single level is scheduled throughout the week from Monday through Friday. The first level will provide you with introduction to the heavy equipment industry. You will also learn how to operate basic heavy equipment. This first level is required for any student that needs to proceed to levels two and three programs.

The second level is designed to help you build upon the first level. It introduces additional equipment and training. It allows you more opportunities in your industry for business and employment. The third level contains instructions on using motor graders, excavators and advanced real world project planning. When you graduate from these programs you’ll be nationally certified and ready to go.

So that is why it is important that you have all of your financial aid already in order and in place. If you have any questions about your financial aid, feel free to call us and we can help you.