Skip to content

Heavy Equipment Maintenance

It is extremely important that heavy equipment operators keep their equipment well maintained and in working order at all times, so the equipment can operate reliably when needed on the work site. When maintenance is kept up to date, the operator can keep his equipment in top condition and be able to visually inspect for repairs that need to be made. If done on a regular basis, these inspections and maintenance can keep heavy equipment in top shape and keep them from major costly and time consuming repairs.

Daily heavy equipment maintenance should include a visual inspection, which should be comprised of a walk around the equipment while looking for leaking fluids and worn parts or belts. Fluid levels should also be checked and topped off during this inspection as well as any dry linkage should be greased where necessary. Lastly, the air pressure levels in the equipment’s tires should be checked and filled as necessary.

Quarterly maintenance should be performed every three months or every 500 hours of use. At this inspection, an oil and filter change should be performed, also, the hydraulic oil filter should be changed. Finally, the diesel fuel filter should be replaced at this quarterly maintenance inspection.

Yearly, or at the end of the season, the hydraulic oil and transmission fluids should be completely replaced. A thorough cleaning should also be done at this point, and a close inspection performed to look for any repairs that should be completed. Lastly, the tires should be given a very close inspection to ensure proper tread, and if they are not up to standards, they should be replaced immediately.

As can be seen in the above steps, there is not a whole lot to maintaining a piece of heavy equipment, as long as a maintenance and inspection schedule is maintained. Like any other type of vehicle, the better shape things are kept in the longer they will last. Hours that are needed for costly repairs are also hours that the piece of machinery is not doing its job on the work site. Through maintenance and inspection, heavy equipment can keep getting the job done and money in the operator’s pocket.

This Post Has 0 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top